I've Bought Solar Mounting Systems for 4 Years. The 'Best' One Doesn't Exist.

An operations buyer's honest take on choosing solar mounting systems — and why knowing what doesn't fit matters more than chasing a 'best in class' ranking.

I've Bought Solar Mounting Systems for 4 Years. The 'Best' One Doesn't Exist.

I've been buying solar mounting systems since 2020. Every time someone asks me to recommend the "best" one, my answer is the same: it doesn't exist.

I'm not being evasive. This market has genuinely good products—several of our current suppliers earned their place after we tested plenty of alternatives. But the word "best" implies a universal winner, and solar mounting systems are exactly the wrong category for that. Flat roof and pitched roof are not the same problem. Commercial and residential are not the same problem. A 90 mph wind zone and a 150 mph wind zone are not even playing the same sport.

I handle operations procurement for a 45-person solar installation company. I manage roughly $1.8 million a year in mounting system and electrical accessory orders across 6 primary vendors, and I report to both our operations director and our finance lead. My projects range from small residential pitched roofs to commercial ground-mounted arrays in the low megawatts. The biggest lesson from all of it isn't "which brand is best." It's "which situations a given system is the wrong fit for."

That's the point of this article: not a ranking, but a way to figure out when the option in front of you probably isn't right for your project.

Roof type eliminates more vendors than price ever will

Here's a fact most brochures gloss over: the mounting system follows the roof, not the brand.

Flat commercial roofs use ballasted systems—no penetrations, just weight. Pitched residential roofs use rail-based systems with clamps or hooks tied into the roof structure. Ground mounts rely on driven piles or helical anchors. Carports are essentially steel structures with PV racking on top. There is no interchangeability between these four categories.

Even within a category, nothing is universal. Pitched roofs alone include asphalt shingle, standing seam metal, clay tile, and slate—each requiring different clamps and attachments. I've watched vendors promise "one system for every roof type," only for the crew to discover on site that their tile hooks simply don't work on standing seam metal.

I should add a specific failure here. In 2021, we tried to rush a residential project and ordered a "universal" pitched-roof racking kit. On site, it turned out to fit asphalt shingle only. We had to emergency-source standing seam clamps from another supplier, the project slipped three days, and the extra cost came to roughly $1,200. I remember that number because it came out of my budget.

So when I evaluate pv solar panel roof mounting systems now, the first thing I check isn't the price sheet. It's which roof types the system actually covers, and whether that matches our current project mix. A vendor that only does flat commercial is probably not the right call for a residential pitched-roof pipeline.

The cheapest quote is usually not the lowest installed cost

This is the procurement habit I most want to correct. Comparing sticker price in this category is genuinely risky.

Everyone told me to look at total installed cost before approving a purchase order. I only believed it after skipping that step once and eating a five-figure mistake.

It was my second year in the role. A new supplier's ballasted flat-roof system came in about 8% cheaper per unit than our incumbent. I ran the annual volume math and decided it was worth a trial order at moderate scale.

The system itself was fine. The problem was that their standard configuration didn't account for the wind load requirements on that specific project. Per ASCE 7-22 wind load calculations, that area's exposure category required heavier ballast blocks and additional fasteners. The sales rep didn't mention it in the quote. By the time our structural review caught it, the added ballast and fasteners pushed the actual project cost about 19% above what our original supplier would have charged.

Put another way: I started comparing "system price per unit." I should have been comparing "installed cost per watt." In mounting systems, those two numbers are frequently not the same. Now the first questions I ask on any quote are: does this include wind load verification? Does it include the correct ballast count for our exposure category? Does it include the adaptation hardware we'll actually need on site?

Electrical accessories are the variable you don't see until after the contract

This one took me longer to fully appreciate. A mounting system never exists in isolation. It sits under the modules and connects to inverters, combiners, wiring—and increasingly, storage components.

A concrete example. Several of our current clients are layering smart solar charge controllers and home battery storage into their roof systems (some ask directly about home battery power bank products). Those components seem unrelated to racking, but they determine two things: where the inverter and battery go, and how the cable runs through that space.

If the racking's cable management is poorly designed—fixed tray position, no adjustability—the electrical install ends up drilling extra penetrations and adding strut, which runs several hundred to over a thousand dollars per project. And then there's roof loading. Some home battery power bank units are heavier than people expect. If the original racking selection didn't leave room for that weight, you're re-engineering later.

(Should mention: client questions here are frequent. A lot of them ask is it worth buying a portable power station? as a backup option. My usual answer: portable units are fine for emergency and low-draw use, but if you're tying into a roof system for whole-home backup, you want a fixed storage solution, not a portable one. That's a pre-sales conversation, but its conclusion feeds back into racking and electrical design—so it does end up affecting procurement.)

So now I don't release a racking PO until the project manager confirms where the electrical design stands. If the electrical drawings aren't locked, the racking will probably arrive first and require rework. I've lived that movie.

"Okay, just tell me which one to pick by scenario."

Fine. If you really want a reference point, here's how I'd frame it by situation:

  • Commercial flat roof: Look at ballasted systems first, provided the roof structure and local wind loads allow it. If the roof can't take the weight or can't be penetrated, you're back to a mechanically attached system with proper waterproofing detail.
  • Residential pitched roof: Match the rail system and clamps to the roof material. Standing seam gets dedicated clamps. Asphalt shingle gets hooks. Clay tile gets adjustable brackets. Do not try to cover every material with one clamp family.
  • Ground mount: Choose driven piles or helical anchors based on soil conditions. Corrosive soils need hot-dip galvanizing or a higher corrosion class.
  • Carport: This is a steel structure plus racking. It needs its own structural calculation—you can't borrow parameters from a roof system.

But here's the honest boundary: if your project is in an extreme wind zone—say coastal Florida or the Caribbean—or the roof is a special structure like a membrane or a historic building, these general rules probably don't apply. What you need is a supplier with local project experience, not a catalog favorite.

I can only speak to mid-size commercial and residential projects across the Midwest and surrounding regions. If you're working utility-scale in coastal high-wind zones, your calculus is likely different from mine, and I'd rather say that than pretend otherwise.

Why I now favor vendors who say "no"

Back to the opening point. The suppliers I trust most aren't the ones who tell me "no problem, we can do that" every time. They're the ones who say "this project isn't a fit for our system."

The reasoning is practical. When a mounting system goes wrong, the real cost isn't the hardware—it's the rework, the schedule slip, and the customer relationship. A vendor willing to state limitations at the quote stage typically saves me more money than they give up on unit price.

When we ran our supplier consolidation in 2024, we ended up with 6 primary partners. Not one of them is a generalist. We have one that's strong on commercial flat roof, one that specializes in residential pitched roof, and one that's particularly solid on ground mount. The selection logic wasn't "who's best." It was "who's clearest about what they're not."

That's the thing about honest recommendations. When a supplier tells you exactly where their system doesn't fit, you're more likely to believe them when they say it does.

Elias Bergstrom

Elias Bergstrom

Elias Bergstrom is a solar array and balance-of-system analyst specializing in mounting structures, trackers, DC cables, connectors, isolators, fuses, combiner boxes, grounding, and surge protection. He applies IEC 62548-1 design requirements while checking cold-condition open-circuit voltage, corrected short-circuit current, conductor ampacity, voltage drop, protection coordination, fastener torque, bonding continuity, and structural interface loads. His application notes help designers and installers coordinate safe array architecture, compatible components, roof or ground conditions, inspection access, and commissioning documentation.